Windows XP , 7 , 8 တို႕တြင္ Software
မသံုးဘဲ WIFI ျပန္လႊင့္နည္း တင္ေပးလုိက္ပါတယ္ခင္မ်..ဒါက
ေတာ့က်ေနာ္အရင္ကတည္းက တင္ခဲ့ဖူးပါတယ္..ဆိုဒ္ Hack လုပ္ခံရေတာ့ပ်က္သြားတယ္..ဘာဘဲျဖစ္ျဖစ္မသိေသးသူမ်ားအတြက္အသစ္ပါ..အဂၤလိပ္လိုေတြျဖစ္ေပမယ့္ရိုး
ရွင္းတဲ့ ၀ါက်ေတြနဲ႕ေရးထားတဲ့အတြက္လူတိုင္း ဖတ္တတ္မွာအေသအခ်ာပါ ( ျမန္မာလိုဘာသာျပန္ရမွာပ်င္းတာ :D )..ကဲေလ့လာႏိုင္ၾကပါၿပီခင္မ်ာ။
ေတာ့က်ေနာ္အရင္ကတည္းက တင္ခဲ့ဖူးပါတယ္..ဆိုဒ္ Hack လုပ္ခံရေတာ့ပ်က္သြားတယ္..ဘာဘဲျဖစ္ျဖစ္မသိေသးသူမ်ားအတြက္အသစ္ပါ..အဂၤလိပ္လိုေတြျဖစ္ေပမယ့္ရိုး
ရွင္းတဲ့ ၀ါက်ေတြနဲ႕ေရးထားတဲ့အတြက္လူတိုင္း ဖတ္တတ္မွာအေသအခ်ာပါ ( ျမန္မာလိုဘာသာျပန္ရမွာပ်င္းတာ :D )..ကဲေလ့လာႏိုင္ၾကပါၿပီခင္မ်ာ။
1. Windows XP
1. Open up Control Panel from the start menu and head to Network
Connections
2. Double
Click the Wireless adapter from the networks list, then go to Wireless
Networks tab then click Add
3. Enter the
SSID (name) of the network, this will appear when scanning for it, and
set the security Key you want then check the last checkbox
(Ad-hoc) finally click OK
4. Finally go back to
network adapters, double click the Internet connection adapter (Local
network) then go to Advanced tab, check the box that says "Allow other
network users to connect through this computer's internet connection" and
select the Wireless adapter from the list then hit OK
2. Windows Vista and 7
1. Enter the Control
Panel from the Start menu, then head to Network and Sharing Center
2. Click Setup a
new connection or network link
3. Scroll down and
click Setup a Wireless ad-hoc
4. Enter the details
of your WiFi hotspot : Appearing Name (SSID), Security Type and Password (Key)
then click Next
5. Finally activate
the internet sharing by click the button "Turn On Internet connection
sharing"
Note: If you can't find the
option 'Turn On internet connection sharing' then go to the Local Network
Adapter > Right Click > Properties > Sharing > Check the box
'Allow other network users to connect through this computer's internet
connection'
3. Windows 8
To create a WiFi Hotspot in Windows 8 you need to perform some cmd commands
in order to activate the hotspot and turn your computer into modem internet
sharer. Here are the commands used in step by step:
1. Search for CMD then click Run as Administrator to run the command
prompt with administrator privileges
2. Run the following
commands one by one:
netsh wlan set hostednetwork mode=allow
ssid=razor-tuts key=password
Note: Change razor-tuts to the SSID (name) of your wifi
and password to the key you want to
use.
netsh wlan start hostednetwork
netsh wlan show hostednetwork
3. The last command
with "show" parameter will show you if the network was created successfully or
not, here's an example of what it outputs:
4. Done! You just
created a WiFi hotspot, now search for it using your iPhone, iPad, Android
device or another Computer equipped with a Wireless adapter.
0 comments:
Post a Comment
ေပ်ာ္ရႊင္ပါေစ...